APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Remote outlet level controls allow power on/off functionality for power recycling to remotely reboot equipment and restrict unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and low profile circuit breakers. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager.
|AC Voltage Range||230V|
|Frequency||50 to 60Hz|
|Maximum Input Current||30A|
|Input Connections||NEMA L6-30P|
|Output Connections||21 x IEC 320 C13 ? 3 x IEC 320 C19|
|Environmental||Operating Temperature -5 to 45?C - Humidity 5 to 95%|
|Form Factor||Rack PDU|
|In The Box||Installation guide ? Rack Mounting brackets ? Safety guide ? Serial configuration cable|
|Dimensions||5.6cm (W) x 4.6cm (D) x 182.9cm (H) - Weight 7.64kg|
APC Rack PDU 2G Switched Zero U 30A 200/208V 21 x C13 and 3 x C19 hasn't been reviewed yet, why not be the first?